Pair of Crossover PCBs for the DA-Wave MT DIY speaker kit - PCB Board Kit

Description

Custom printed circuit boards designed for the crossover of the DA-Wave MT DIY speaker kits sold by Parts Express.
The boards measure 5.3" x 4" and feature large solder pads and copper traces for great electrical connectivity
Note photos of fully assembled crossovers are for example only.
Includes:
2x Crossover PCBs for the
DA-Wave MT
speaker kit.
6x Terminal blocks which accept up to 12 gauge wire.
8x Snap in PCB standoffs.
8x Mounting screws (screw finish may vary).
Requires:
Crossover components from the
DA-Wave MT
speaker kit.
Compatible components tested for fit on this PCB:
C1 - 10uF - Dayton Audio PMPC-10
C2
- 5.1uF - Dayton Audio PMPC-5.1
C3 - 1.5uF - Dayton Audio PMPC-1.5
L1 - 1.0mH - Dayton Audio 1.0mH 14 AWG Air Core Inductor
L2 - 0.2mH -  Dayton Audio 0.2mH 18 AWG Air Core Inductor
L3 - 0.13mH -  Dayton Audio 0.13mH 18 AWG Air Core Inductor
R1 - 2 Ohm - Dayton Audio DNR-2.0
Assembly:
Glue components to the correct positions on the board (hot melt glue works great). Secure inductors with non metallic cable ties. Solder components leads to the pads on the bottom of the board. Attach wires from input and drivers and mount crossover board.